EN1A(L) Bright Bars
A leaded free-cutting designation that must be specified separately from unleaded EN1A.

Representative material photograph, not grade-specific. Replace with approved product photography.
EN1A(L): material overview
The L designation is commonly used to identify a leaded free-cutting variant. EN1A and EN1A(L) must not be merged in procurement records. Lead-content and restricted-substance requirements need explicit review for the intended customer and market.
What to specify at enquiry
State whether a leaded material is permitted by your drawing and customer requirements. Ask for confirmation of the exact ordered designation, approved composition and documentation before accepting any substitution.
Application considerations
High-volume turned components where a leaded free-cutting material is explicitly permitted and approved. Restricted-substance compliance requires separate confirmation.
Manufactured or supplied?
Bright bar manufacturing is a company activity; the in-house or sourced supply route for EN1A(L), its dimensions and condition must be confirmed individually. Black bars and coils are supplied rather than described as manufactured in-house.
Before you specify
Draft technical overview. Company approval required for current availability, supply route, applicable standards and all technical values.
Product forms
Bright bars by enquiry. Rounds, hexagons, squares, flats and profiles are subject to grade-specific confirmation; black bars and coils are supplied where available.
Sizes, lengths & tolerances
5 mm to 250 mm
Supply condition
Black Bar/Coil, Bright Hexagon, Bright/Ground Bars
Material standard
COMPANY TO CONFIRM — governing material standard, edition and any customer-specific requirements. No equivalence to a different designation is implied.
Alternative spellings, not equivalences
EN1A L / EN1AL — naming to be confirmed on the order
Inspection & documentation
COMPANY TO CONFIRM — available material test reports, heat traceability, test methods, sampling and reporting scope for this grade and order.
Chemical composition
Element | Minimum (%) | Maximum (%) |
|---|---|---|
Carbon (C) | 0.070 | 0.150 |
Manganese (Mn) | 0.800 | 1.200 |
Silicon (Si) | - | 0.100 |
Sulphur (S) | 0.200 | 0.300 |
Phosphorus (P) | - | 0.070 |
Lead (Pb) | 0.150 | 0.350 |
Mechanical properties
NOT YET APPROVED — insert verified EN1A(L) mechanical-property requirements with the relevant size and delivery condition. No property values are implied.
Continue your material review.
Related reading, not equivalent grades. Any substitution requires an approved specification review.