EN1A Bright Bars
A free-cutting grade for machining-led requirements, where the drawing calls for EN1A.

Representative material photograph, not grade-specific. Replace with approved product photography.
EN1A: material overview
EN1A is commonly selected for repeat turning and machining operations. The grade designation alone does not define a finished component’s performance; the governing specification, product condition and acceptance criteria remain important.
What to specify at enquiry
For an EN1A enquiry, describe the machining operation and whether the component will undergo further treatment. Do not assume weldability, a leaded variant or suitability for highly stressed parts from the EN1A name alone.
Application considerations
Turned parts and precision-machined components where EN1A is specifically approved by the component designer. Confirm loading, further processing and acceptance criteria.
Manufactured or supplied?
Bright bar manufacturing is a company activity; the in-house or sourced supply route for EN1A, its dimensions and condition must be confirmed individually. Black bars and coils are supplied rather than described as manufactured in-house.
Before you specify
Draft technical overview. Company approval required for current availability, supply route, applicable standards and all technical values.
Product forms
Bright bars by enquiry. Rounds, hexagons, squares, flats and profiles are subject to grade-specific confirmation; black bars and coils are supplied where available.
Sizes, lengths & tolerances
5 mm to 250 mm
Supply condition
Black Bar/Coil, Bright Hexagon, Bright/Ground Bars
Material standard
COMPANY TO CONFIRM — governing material standard, edition and any customer-specific requirements. No equivalence to a different designation is implied.
Alternative spellings, not equivalences
EN 1A (spacing only; not an equivalence)
Inspection & documentation
COMPANY TO CONFIRM — available material test reports, heat traceability, test methods, sampling and reporting scope for this grade and order.
Chemical composition
Element | Minimum (%) | Maximum (%) |
|---|---|---|
Carbon (C) | 0.070 | 0.150 |
Manganese (Mn) | 0.800 | 1.200 |
Silicon (Si) | - | 0.100 |
Sulphur (S) | 0.200 | 0.300 |
Phosphorus (P) | - | 0.070 |
Mechanical properties
NOT YET APPROVED — insert verified EN1A mechanical-property requirements with the relevant size and delivery condition. No property values are implied.
Continue your material review.
Related reading, not equivalent grades. Any substitution requires an approved specification review.