16MnCr5 Bright Bars
A manganese-chromium case-hardening grade for parts designed around a hardened surface and a supporting core.

Representative material photograph, not grade-specific. Replace with approved product photography.
16MnCr5: material overview
16MnCr5 is used in case-hardening applications. The finished surface and core characteristics depend on the carburising and heat-treatment route, component geometry and approved specification. Bright bar supply is not the same as a finished case-hardened component.
What to specify at enquiry
State the final application and any case-hardening, hardenability or inspection requirements when enquiring. Confirm the ordered standard and material condition; 20MnCr5 and SAE 8620 are separate grades, not interchangeable alternatives.
Application considerations
Gears, pinions and other case-hardened components where 16MnCr5 is specified and the final treatment is qualified.
Manufactured or supplied?
Bright bar manufacturing is a company activity; the in-house or sourced supply route for 16MnCr5, its dimensions and condition must be confirmed individually. Black bars and coils are supplied rather than described as manufactured in-house.
Before you specify
Draft technical overview. Company approval required for current availability, supply route, applicable standards and all technical values.
Product forms
Bright bars by enquiry. Rounds, hexagons, squares, flats and profiles are subject to grade-specific confirmation; black bars and coils are supplied where available.
Sizes, lengths & tolerances
5 mm to 250 mm
Supply condition
Black Bar/Coil, Bright Hexagon, Bright/Ground Bars
Material standard
COMPANY TO CONFIRM — governing material standard, edition and any customer-specific requirements. No equivalence to a different designation is implied.
Alternative spellings, not equivalences
16 Mn Cr 5 (spacing only)
Inspection & documentation
COMPANY TO CONFIRM — available material test reports, heat traceability, test methods, sampling and reporting scope for this grade and order.
Chemical composition
Element | Minimum (%) | Maximum (%) |
|---|---|---|
Carbon (C) | 0.140 | 0.190 |
Manganese (Mn) | 1.000 | 1.300 |
Silicon (Si) | - | 0.400 |
Sulphur (S) | - | 0.035 |
Phosphorus (P) | - | 0.025 |
Chromium (Cr) | 0.800 | 1.100 |
Mechanical properties
NOT YET APPROVED — insert verified 16MnCr5 mechanical-property requirements with the relevant size and delivery condition. No property values are implied.
Continue your material review.
Related reading, not equivalent grades. Any substitution requires an approved specification review.