EN353 Bright Bars
A nickel-chromium-molybdenum case-hardening designation for engineering procurement.

Representative material photograph, not grade-specific. Replace with approved product photography.
EN353: material overview
EN353 is commonly associated with alloy steel used for case-hardened components. The ordered condition and subsequent carburising and heat treatment must be established independently of the bright surface finish.
What to specify at enquiry
For an EN353 enquiry, provide the component drawing requirements and planned processing route. Confirm the precise standard, chemistry and inspection requirements; do not assume equivalence with SAE 8620 or another case-hardening steel.
Application considerations
Gears, transmission parts and other case-hardened components only where EN353 has been selected and validated by the designer.
Manufactured or supplied?
Bright bar manufacturing is a company activity; the in-house or sourced supply route for EN353, its dimensions and condition must be confirmed individually. Black bars and coils are supplied rather than described as manufactured in-house.
Before you specify
Draft technical overview. Company approval required for current availability, supply route, applicable standards and all technical values.
Product forms
Bright bars by enquiry. Rounds, hexagons, squares, flats and profiles are subject to grade-specific confirmation; black bars and coils are supplied where available.
Sizes, lengths & tolerances
5 mm to 250 mm
Supply condition
Black Bar/Coil, Bright Hexagon, Bright/Ground Bars
Material standard
COMPANY TO CONFIRM — governing material standard, edition and any customer-specific requirements. No equivalence to a different designation is implied.
Alternative spellings, not equivalences
EN 353 (spacing only)
Inspection & documentation
COMPANY TO CONFIRM — available material test reports, heat traceability, test methods, sampling and reporting scope for this grade and order.
Chemical composition
Element | Minimum (%) | Maximum (%) |
|---|---|---|
Carbon (C) | 0.140 | 0.200 |
Manganese (Mn) | 0.600 | 0.900 |
Silicon (Si) | 0.100 | 0.350 |
Sulphur (S) | - | 0.015 |
Phosphorus (P) | - | 0.035 |
Chromium (Cr) | 0.800 | 1.200 |
Nickel (Ni) | 1.200 | 1.700 |
Molybdenum (Mo) | 0.100 | 0.200 |
Aluminium (Al) | 0.020 | 0.040 |
Mechanical properties
NOT YET APPROVED — insert verified EN353 mechanical-property requirements with the relevant size and delivery condition. No property values are implied.
Continue your material review.
Related reading, not equivalent grades. Any substitution requires an approved specification review.