SAE 8620 Bright Bars
A nickel-chromium-molybdenum case-hardening grade for specified engineering-component requirements.

Representative material photograph, not grade-specific. Replace with approved product photography.
SAE 8620: material overview
SAE 8620 is an alloy steel commonly used for carburised components. Its intended combination of surface and core characteristics is developed through the specified treatment route; it is not a guaranteed property of every as-supplied bar.
What to specify at enquiry
For SAE 8620, include the ordered material specification, delivery condition and downstream carburising requirements. Discuss required documentation and hardenability criteria where applicable. Do not substitute 16MnCr5 on the basis of a shared case-hardening application.
Application considerations
Carburised gears, shafts and related components where SAE 8620 is expressly approved for the part and treatment route.
Manufactured or supplied?
Bright bar manufacturing is a company activity; the in-house or sourced supply route for SAE 8620, its dimensions and condition must be confirmed individually. Black bars and coils are supplied rather than described as manufactured in-house.
Before you specify
Draft technical overview. Company approval required for current availability, supply route, applicable standards and all technical values.
Product forms
Bright bars by enquiry. Rounds, hexagons, squares, flats and profiles are subject to grade-specific confirmation; black bars and coils are supplied where available.
Sizes, lengths & tolerances
5 mm to 250 mm
Supply condition
Black Bar/Coil, Bright Hexagon, Bright/Ground Bars
Material standard
COMPANY TO CONFIRM — governing material standard, edition and any customer-specific requirements. No equivalence to a different designation is implied.
Alternative spellings, not equivalences
SAE8620 (spacing only)
Inspection & documentation
COMPANY TO CONFIRM — available material test reports, heat traceability, test methods, sampling and reporting scope for this grade and order.
Chemical composition
Element | Minimum (%) | Maximum (%) |
|---|---|---|
Carbon (C) | 0.180 | 0.230 |
Manganese (Mn) | 0.700 | 0.900 |
Silicon (Si) | 0.150 | 0.300 |
Sulphur (S) | - | 0.040 |
Phosphorus (P) | - | 0.030 |
Chromium (Cr) | 0.400 | 0.600 |
Nickel (Ni) | 0.400 | 0.700 |
Molybdenum (Mo) | 0.150 | 0.250 |
Mechanical properties
NOT YET APPROVED — insert verified SAE 8620 mechanical-property requirements with the relevant size and delivery condition. No property values are implied.
Continue your material review.
Related reading, not equivalent grades. Any substitution requires an approved specification review.