CK45 Bright Bars
A medium-carbon steel designation requiring confirmation of the exact standard and condition.

Representative material photograph, not grade-specific. Replace with approved product photography.
CK45: material overview
CK45 is used as a medium-carbon steel designation in engineering procurement. A legacy grade name should be matched to the exact ordered specification, not silently converted to a newer designation or another national standard.
What to specify at enquiry
Include the standard and edition appearing on the drawing. State any heat-treatment condition and required property values separately, and request a reviewed comparison if an alternative grade is proposed.
Application considerations
Machined shafts, pins and engineering parts where CK45 has been approved for the specified condition and duty.
Manufactured or supplied?
Bright bar manufacturing is a company activity; the in-house or sourced supply route for CK45, its dimensions and condition must be confirmed individually. Black bars and coils are supplied rather than described as manufactured in-house.
Before you specify
Draft technical overview. Company approval required for current availability, supply route, applicable standards and all technical values.
Product forms
Bright bars by enquiry. Rounds, hexagons, squares, flats and profiles are subject to grade-specific confirmation; black bars and coils are supplied where available.
Sizes, lengths & tolerances
5 mm to 250 mm
Supply condition
Black Bar/Coil, Bright Hexagon, Bright/Ground Bars
Material standard
COMPANY TO CONFIRM — governing material standard, edition and any customer-specific requirements. No equivalence to a different designation is implied.
Alternative spellings, not equivalences
Ck45 (capitalisation only)
Inspection & documentation
COMPANY TO CONFIRM — available material test reports, heat traceability, test methods, sampling and reporting scope for this grade and order.
Chemical composition
Element | Minimum (%) | Maximum (%) |
|---|---|---|
Carbon (C) | 0.420 | 0.500 |
Manganese (Mn) | 0.500 | 0.800 |
Silicon (Si) | - | 0.400 |
Sulphur (S) | - | 0.040 |
Phosphorus (P) | - | 0.035 |
Mechanical properties
NOT YET APPROVED — insert verified CK45 mechanical-property requirements with the relevant size and delivery condition. No property values are implied.
Continue your material review.
Related reading, not equivalent grades. Any substitution requires an approved specification review.