EN19 Bright Bars
A chromium-molybdenum alloy steel designation for engineering applications requiring a defined condition.

Representative material photograph, not grade-specific. Replace with approved product photography.
EN19: material overview
EN19 is associated with chromium-molybdenum alloy steel used in engineering components. Its useful properties depend strongly on heat treatment and section size. No strength, hardness or supplied heat-treatment condition is implied by this draft listing.
What to specify at enquiry
For an EN19 bright bar quotation, specify the ordered standard, section size and required delivery condition. If your drawing cites another designation, request a documented technical comparison; do not assume automatic equivalence to SAE 4140 or 42CrMo4.
Application considerations
Shafts, spindles and other engineering components where EN19 and the required heat-treatment condition are approved by the designer.
Manufactured or supplied?
Bright bar manufacturing is a company activity; the in-house or sourced supply route for EN19, its dimensions and condition must be confirmed individually. Black bars and coils are supplied rather than described as manufactured in-house.
Before you specify
Draft technical overview. Company approval required for current availability, supply route, applicable standards and all technical values.
Product forms
Bright bars by enquiry. Rounds, hexagons, squares, flats and profiles are subject to grade-specific confirmation; black bars and coils are supplied where available.
Sizes, lengths & tolerances
5 mm to 250 mm
Supply condition
Black Bar/Coil, Bright Hexagon, Bright/Ground Bars
Material standard
COMPANY TO CONFIRM — governing material standard, edition and any customer-specific requirements. No equivalence to a different designation is implied.
Alternative spellings, not equivalences
EN 19 (spacing only)
Inspection & documentation
COMPANY TO CONFIRM — available material test reports, heat traceability, test methods, sampling and reporting scope for this grade and order.
Chemical composition
Element | Minimum (%) | Maximum (%) |
|---|---|---|
Carbon (C) | 0.350 | 0.450 |
Manganese (Mn) | 0.500 | 0.800 |
Silicon (Si) | 0.100 | 0.350 |
Sulphur (S) | - | 0.050 |
Phosphorus (P) | - | 0.050 |
Chromium (Cr) | 0.900 | 1.500 |
Molybdenum (Mo) | 0.200 | 0.400 |
Mechanical properties
NOT YET APPROVED — insert verified EN19 mechanical-property requirements with the relevant size and delivery condition. No property values are implied.
Continue your material review.
Related reading, not equivalent grades. Any substitution requires an approved specification review.