SAE 1018 Bright Bars
A low-carbon steel grade for general machining and engineering requirements specified to SAE 1018.

Representative material photograph, not grade-specific. Replace with approved product photography.
SAE 1018: material overview
SAE 1018 is a low-carbon designation used for general engineering material requirements. Cold finishing can affect dimensions, surface and mechanical behaviour; it does not make every product condition identical.
What to specify at enquiry
For SAE 1018 bright bars, state the governing specification, form and dimensional acceptance criteria. If welding, forming or a subsequent surface-hardening process is planned, include those operations for technical review.
Application considerations
General turned or machined parts, pins and related components where SAE 1018 is approved. Confirm suitability for the actual duty and downstream processes.
Manufactured or supplied?
Bright bar manufacturing is a company activity; the in-house or sourced supply route for SAE 1018, its dimensions and condition must be confirmed individually. Black bars and coils are supplied rather than described as manufactured in-house.
Before you specify
Draft technical overview. Company approval required for current availability, supply route, applicable standards and all technical values.
Product forms
Bright bars by enquiry. Rounds, hexagons, squares, flats and profiles are subject to grade-specific confirmation; black bars and coils are supplied where available.
Sizes, lengths & tolerances
5 mm to 250 mm
Supply condition
Black Bar/Coil, Bright Hexagon, Bright/Ground Bars
Material standard
COMPANY TO CONFIRM — governing material standard, edition and any customer-specific requirements. No equivalence to a different designation is implied.
Alternative spellings, not equivalences
SAE1018 (spacing only)
Inspection & documentation
COMPANY TO CONFIRM — available material test reports, heat traceability, test methods, sampling and reporting scope for this grade and order.
Chemical composition
Element | Minimum (%) | Maximum (%) |
|---|---|---|
Carbon (C) | 0.150 | 0.200 |
Manganese (Mn) | 0.600 | 0.900 |
Silicon (Si) | - | 0.300 |
Sulphur (S) | - | 0.050 |
Phosphorus (P) | - | 0.040 |
Mechanical properties
NOT YET APPROVED — insert verified SAE 1018 mechanical-property requirements with the relevant size and delivery condition. No property values are implied.
Continue your material review.
Related reading, not equivalent grades. Any substitution requires an approved specification review.