42CrMo4 Bright Bars
A chromium-molybdenum steel designation for grade- and condition-specific enquiries.

Representative material photograph, not grade-specific. Replace with approved product photography.
42CrMo4: material overview
42CrMo4 is an alloy steel designation used for engineering components, often with a specified heat-treatment condition. The material standard edition, ordered condition and acceptance criteria are essential parts of a purchase specification.
What to specify at enquiry
Reproduce the full designation and condition from the component drawing. Require documentary review before considering SAE 4140 or EN19 as alternatives; similar intended uses do not establish identical standard requirements.
Application considerations
Heat-treated engineering components where 42CrMo4 is specified. Final suitability depends on design requirements and processing.
Manufactured or supplied?
Bright bar manufacturing is a company activity; the in-house or sourced supply route for 42CrMo4, its dimensions and condition must be confirmed individually. Black bars and coils are supplied rather than described as manufactured in-house.
Before you specify
Draft technical overview. Company approval required for current availability, supply route, applicable standards and all technical values.
Product forms
Bright bars by enquiry. Rounds, hexagons, squares, flats and profiles are subject to grade-specific confirmation; black bars and coils are supplied where available.
Sizes, lengths & tolerances
5 mm to 250 mm
Supply condition
Black Bar/Coil, Bright Hexagon, Bright/Ground Bars
Material standard
COMPANY TO CONFIRM — governing material standard, edition and any customer-specific requirements. No equivalence to a different designation is implied.
Alternative spellings, not equivalences
42 Cr Mo 4 (spacing only)
Inspection & documentation
COMPANY TO CONFIRM — available material test reports, heat traceability, test methods, sampling and reporting scope for this grade and order.
Chemical composition
Element | Minimum (%) | Maximum (%) |
|---|---|---|
Carbon (C) | 0.380 | 0.450 |
Manganese (Mn) | 0.600 | 0.900 |
Silicon (Si) | - | 0.400 |
Sulphur (S) | - | 0.035 |
Phosphorus (P) | - | 0.025 |
Chromium (Cr) | 0.900 | 1.200 |
Molybdenum (Mo) | 0.150 | 0.300 |
Mechanical properties
NOT YET APPROVED — insert verified 42CrMo4 mechanical-property requirements with the relevant size and delivery condition. No property values are implied.
Continue your material review.
Related reading, not equivalent grades. Any substitution requires an approved specification review.