SAE 4140 Bright Bars
A chromium-molybdenum alloy grade for orders with a clearly defined material condition.

Representative material photograph, not grade-specific. Replace with approved product photography.
SAE 4140: material overview
SAE 4140 is a chromium-molybdenum alloy steel commonly considered for heat-treated engineering components. Its delivered condition must be specified separately from the basic grade designation.
What to specify at enquiry
Confirm the governing purchase specification, heat-treatment condition and any required hardenability or test documentation. EN19 and 42CrMo4 are often discussed alongside it, but this catalogue does not establish interchangeability.
Application considerations
Shafts, machine parts and other engineered components where SAE 4140 and the required condition have been approved.
Manufactured or supplied?
Bright bar manufacturing is a company activity; the in-house or sourced supply route for SAE 4140, its dimensions and condition must be confirmed individually. Black bars and coils are supplied rather than described as manufactured in-house.
Before you specify
Draft technical overview. Company approval required for current availability, supply route, applicable standards and all technical values.
Product forms
Bright bars by enquiry. Rounds, hexagons, squares, flats and profiles are subject to grade-specific confirmation; black bars and coils are supplied where available.
Sizes, lengths & tolerances
5 mm to 250 mm
Supply condition
Black Bar/Coil, Bright Hexagon, Bright/Ground Bars
Material standard
COMPANY TO CONFIRM — governing material standard, edition and any customer-specific requirements. No equivalence to a different designation is implied.
Alternative spellings, not equivalences
SAE4140 (spacing only)
Inspection & documentation
COMPANY TO CONFIRM — available material test reports, heat traceability, test methods, sampling and reporting scope for this grade and order.
Chemical composition
Element | Minimum (%) | Maximum (%) |
|---|---|---|
Carbon (C) | 0.380 | 0.430 |
Manganese (Mn) | 0.750 | 1.000 |
Silicon (Si) | 0.150 | 0.350 |
Sulphur (S) | - | 0.040 |
Phosphorus (P) | - | 0.035 |
Chromium (Cr) | 0.800 | 1.100 |
Molybdenum (Mo) | 0.150 | 0.250 |
Mechanical properties
NOT YET APPROVED — insert verified SAE 4140 mechanical-property requirements with the relevant size and delivery condition. No property values are implied.
Continue your material review.
Related reading, not equivalent grades. Any substitution requires an approved specification review.