EN24 Bright Bars
A nickel-chromium-molybdenum alloy steel designation for demanding engineering enquiries.

Representative material photograph, not grade-specific. Replace with approved product photography.
EN24: material overview
EN24 is associated with nickel-chromium-molybdenum alloy steel. Performance must be considered together with section size, heat treatment and the required property specification. This listing does not imply any particular EN24 heat-treatment suffix or condition.
What to specify at enquiry
Specify the complete designation and any condition suffix on the drawing. Identify the required strength, hardness and test documentation explicitly, and ask the company to confirm the current supply route for the requested form.
Application considerations
Highly loaded shafts and engineering parts where EN24 in a defined condition has been selected by the responsible engineer.
Manufactured or supplied?
Bright bar manufacturing is a company activity; the in-house or sourced supply route for EN24, its dimensions and condition must be confirmed individually. Black bars and coils are supplied rather than described as manufactured in-house.
Before you specify
Draft technical overview. Company approval required for current availability, supply route, applicable standards and all technical values.
Product forms
Bright bars by enquiry. Rounds, hexagons, squares, flats and profiles are subject to grade-specific confirmation; black bars and coils are supplied where available.
Sizes, lengths & tolerances
5 mm to 250 mm
Supply condition
Black Bar/Coil, Bright Hexagon, Bright/Ground Bars
Material standard
COMPANY TO CONFIRM — governing material standard, edition and any customer-specific requirements. No equivalence to a different designation is implied.
Alternative spellings, not equivalences
EN 24 (spacing only)
Inspection & documentation
COMPANY TO CONFIRM — available material test reports, heat traceability, test methods, sampling and reporting scope for this grade and order.
Chemical composition
Element | Minimum (%) | Maximum (%) |
|---|---|---|
Carbon (C) | 0.350 | 0.450 |
Manganese (Mn) | 0.450 | 0.700 |
Silicon (Si) | 0.100 | 0.350 |
Sulphur (S) | - | 0.050 |
Phosphorus (P) | - | 0.050 |
Chromium (Cr) | 0.900 | 1.400 |
Nickel (Ni) | 1.300 | 1.800 |
Molybdenum (Mo) | 0.200 | 0.350 |
Mechanical properties
NOT YET APPROVED — insert verified EN24 mechanical-property requirements with the relevant size and delivery condition. No property values are implied.
Continue your material review.
Related reading, not equivalent grades. Any substitution requires an approved specification review.