EN32B Bright Bars
A low-carbon case-hardening designation for specifically approved component requirements.

Representative material photograph, not grade-specific. Replace with approved product photography.
EN32B: material overview
EN32B is commonly associated with low-carbon steel for case-hardening applications. A carburised surface is produced through subsequent processing; this catalogue does not imply that the supplied bar has already been case hardened.
What to specify at enquiry
Specify the ordered material standard, delivery condition and planned treatment. Identify the required case and core performance on the drawing, and confirm the inspection route with the company before ordering.
Application considerations
Lightly loaded case-hardened pins, bushes and related components where EN32B is specifically selected by the component designer.
Manufactured or supplied?
Bright bar manufacturing is a company activity; the in-house or sourced supply route for EN32B, its dimensions and condition must be confirmed individually. Black bars and coils are supplied rather than described as manufactured in-house.
Before you specify
Draft technical overview. Company approval required for current availability, supply route, applicable standards and all technical values.
Product forms
Bright bars by enquiry. Rounds, hexagons, squares, flats and profiles are subject to grade-specific confirmation; black bars and coils are supplied where available.
Sizes, lengths & tolerances
5 mm to 250 mm
Supply condition
Black Bar/Coil, Bright Hexagon, Bright/Ground Bars
Material standard
COMPANY TO CONFIRM — governing material standard, edition and any customer-specific requirements. No equivalence to a different designation is implied.
Alternative spellings, not equivalences
EN 32B (spacing only)
Inspection & documentation
COMPANY TO CONFIRM — available material test reports, heat traceability, test methods, sampling and reporting scope for this grade and order.
Chemical composition
Element | Minimum (%) | Maximum (%) |
|---|---|---|
Carbon (C) | 0.100 | 0.180 |
Manganese (Mn) | 0.600 | 1.000 |
Silicon (Si) | 0.050 | 0.350 |
Sulphur (S) | - | 0.070 |
Phosphorus (P) | - | 0.050 |
Mechanical properties
NOT YET APPROVED — insert verified EN32B mechanical-property requirements with the relevant size and delivery condition. No property values are implied.
Continue your material review.
Related reading, not equivalent grades. Any substitution requires an approved specification review.